Zeron 100
UNS S32760 WN 1.4501
Steel Type: Super Duplex
Operations: Sour
PRE No. >41
In addition to combining high strength with good and ductility ZERON 100 slicklines have exceptional resistance to chloride and sulphide stress corrosion cracking, acid corrosion and crevice corrosion making them suitable for a wide range of corrosive sour well environments
Novametal is the sole manufacturer of ZERON® 100 Slicklines
Key Characteristics
- Outstanding resistance to chloride-induced stress corrosion cracking (SCC) and sulphide-stress cracking (SSC) in sour-gas conditions
- Resistant to SSC in sour, condensed waters with 0.4 bar partial pressure of H2S
- Outstanding corrosion resistance under warm seawater conditions, along with superior pitting resistance
- High break loads with good ductility
- May be used in temperatures up to 300°C
- Good atmospheric corrosion enabling safe marine / offshore storage
- High resistance to abrasion, fatigue and corrosion fatigue
- Very resistant in sweet wells, to corrosion by CO2
Key Data
| Standard Diameter1 | Min Breaking Load* | Min Tensile | Nominal Weight | Minimum Sheave Diameter | |
| Inches | lbf | N/mm2 | Ksi | lbs/ 1000ft | Inches |
| 0.092 | 1750 - 1800 | 1805 | 263 | 22.10 | 11 |
| 0.108 | 2350 - 2400 | 1800 | 260 | 30.55 | 13 |
| 0.125 | 3150 - 3200 | 1820 | 263 | 41.03 | 15 |
| 0.140 | 3950 - 4050 | 1810 | 263 | 51.54 | 17 |
| 0.160 | 5050 - 5150 | 1760 | 256 | 67.45 | 20 |
| 1 Tolerance +/-0.001" - other diameters are available on request. 2 Weight of tool string plus weight of wire of the drum. * When using a portable wire tester expect a MBL figure up to 25% less than the true figure obtained on our in-house calibrated equipment. |
|||||
| Standard Lengths | 15,000ft | 18,000ft | 6,000m | 20,000ft | 7,000m | 25,000ft | 8,000m | 30,000ft |
| Other lengths are available on request. | ||||||||